HELICAL OIL SEPARATORS & RESERVOIR

  • Helisel Yağ Ayırcı & Yağ Depolu, Helical Oil Separator, Ресиверы масляные - маслоотделители, Ölabscheider, Separatori d’olio, séparateur d'huiles helical, Helicoidal Separador de óleo & Reservatório, Helicoidal Separadores de Aceites, Ελαιοδιαχωριστές ελικοειδής με φλάντζα και φιάλη λαδιού, Масловідокремлювач з ресивером, 高效油分, 船用油分離器,  
  • Helisel Yağ Ayırcı & Yağ Depolu, Helical Oil Separator, Ресиверы масляные - маслоотделители, Ölabscheider, Separatori d’olio, séparateur d'huiles helical, Helicoidal Separador de óleo & Reservatório, Helicoidal Separadores de Aceites, Ελαιοδιαχωριστές ελικοειδής με φλάντζα και φιάλη λαδιού, Масловідокремлювач з ресивером, 高效油分, 船用油分離器,  
  • Helisel Yağ Ayırcı & Yağ Depolu, Helical Oil Separator, Ресиверы масляные - маслоотделители, Ölabscheider, Separatori d’olio, séparateur d'huiles helical, Helicoidal Separador de óleo & Reservatório, Helicoidal Separadores de Aceites, Ελαιοδιαχωριστές ελικοειδής με φλάντζα και φιάλη λαδιού, Масловідокремлювач з ресивером, 高效油分, 船用油分離器,  

Introduction

The task of the helical oil separators is to separate oil from the discharge refrigerant correctly and ensure oil return to the compressor most effectively. The purpose is maintaining crankcase oil level and increasing the efficiency of the system by minimizing the excessive oil circulation. Helical oil separators are designed for high pressure oil management systems, they can be used in various systems and multiple compressors. The products are designed for use with scroll and piston compressors, they are not recommended for screw or rotary vane compressors.

Standard product series are designed for use with HCFC & HFC refrigerant with the relevant oil. (please contact us for ammonia system refrigerant). The surface of the oil separator is wrapped with a stainless filter, so that heavier oil particles adhere through helical path, separate from discharge refrigerant and drain.

Gas/oil mixture is moved along spiral path by centrifugal force, and oil particles revolve on surface of perimeter and collide with layer. Separated oil is stocked in a tank placed in bottom part together with directing particles within the system. Flow of oil in desired direction can be ensured using 3/8” rotalock valve on bottom base. There is not a float system inside the product.

Technical Specification

On standard products;
- ODS solder connection is used for inlet & outlet,
- 3/8” rotalock valve for reservoir outlet,
- 2 pcs SW36 sight glasses,
- There is M20x1,5 connection for oil level sensor.
It is produced in accordance with CE 2014/68/EU [PED] pressure equipment directive.

Warning

- Before installing rotalock valve, ensure that gasket channel is clean and not damaged.
- In case oil level falls below level of sight glass on the reservoir please add extra oil.
- Sight glasses are mounted by us, do not make any operation with them. When carrying out a general leaking test check if there is any leak at the sight glasses and please ensure that they are not damaged.

Please contact us for R600a, R290 & R1270.
NH3 Please create the order code as NH.

Documents

360° Items Images

Info Request Form

“YOUR SOLUTION PARTNER” IN PRESSURE VESSELS INDUSTRY

A WORLDWIDE BRAND WITH ITS EXPORT TO 54 COUNTRIES