COALESCENT OIL SEPARATORS

  • filtreli yağ ayırıcıları, filtreli yağ ayırıcı, coalescent oil separators, coalescent oil separator,  
  • filtreli yağ ayırıcıları, filtreli yağ ayırıcı, coalescent oil separators, coalescent oil separator,  
  • filtreli yağ ayırıcıları, filtreli yağ ayırıcı, coalescent oil separators, coalescent oil separator,
  • filtreli yağ ayırıcıları, filtreli yağ ayırıcı, coalescent oil separators, coalescent oil separator,
  • filtreli yağ ayırıcıları, filtreli yağ ayırıcı, coalescent oil separators, coalescent oil separator,  

Introduction

The task of coalescent oil separators is to separate oil from the discharge refrigerant correctly and ensure oil return to the compressor most efffectively. The purpose is to maintain crankcase oil level and increase the efficiency of the system by minimizing the excessive oil circulation. Glass fiber micro filter elements highly efficiently separate aerosol particles from the discharge gas flow. Thereby, the aerosol particles collide with borosilicate fibers and agglomerate into larger drops. The drops are drained to the bottom by gravity for oil return.
Coalescent oil separators also separate solid particles from the discharge gas/ oil. However, coalescent oil separators should not be used to clean refrigeration systems. A continuous increase of the pressure drop shows that coalescence element is dirty. It is recommended to change the filter, when pressure drop increases.

Coalescent oil separators type are designed for using in various systems and multiple compressors for maximum energy-efficiency and low pressure oil management systems. Standard product series are designed for use with HCFC, HFC, CO2 and NH3 refrigerant with the relevant oil. OS.C.45b series models are designed for use with an external reservoir.

Coalescent oil separators & flange type are the products with float system:
All active parts are fully made of stainless steel in the float system. It is protected against pressure and circulation which may occur inside the product. Any contamination which may occur in the system can be easily caught by magnet in float system at oil outlet, thus it ensures that valve operates in cleaner environment.

Application Field

It is strongly recommended to use oil separators under the following conditions:
Low evaporation temperature applications, capacity controlled systems, parallel connected compres-sors, flooded evaporators, blast freezer, two-stage compressors, cascade systems, long line systems.

Selection

Coalescent oil separator selection is made according to the refrigeration technical rules and oil separator connections must not have smaller diameter than discharge line size.

Technical Specification

- Detachable flange provides easy cleaning and check-up.
- Active parts and coalescent filter can be replaced when needed.
- ODS solder connection is used for inlet & outlet on standard products.
- It is produced in accordance with CE 2014/68/EU [PED] pressure equipment directive.

Warning

- Please ensure that the float system is not damaged and it is working properly.
- Before installing flange connection, ensure that O-ring channel is clean and not damaged. Place the O-ring into the channel correctly and mount by tightening bolts with equal torque.
- Ensure that internal filter is placed correctly and not damaged.

Documents

360° Items Images

Info Request Form

“YOUR SOLUTION PARTNER” IN PRESSURE VESSELS INDUSTRY

A WORLDWIDE BRAND WITH ITS EXPORT TO 54 COUNTRIES